Getting Started

Please follow our easy step by step guide to ensure proper use of my Takker:

Step 1

Remove the Takker from the packaging
(If the Takker already has "Takks" loaded, skip steps 2, 3 and 4)

Step 2

Twist, pull and remove the spring loaded device on the side of the Takker™.

Step 3

Insert the Takks into the Chamber.(A maximum of 12 Takks can be inserted into the Takker.

Step 4

Re-insert the spring loaded device into the Takker™.

The Takker™ is now ready to use. Simply place the Takker™ on a flat surface, hold in place and push the red plunger with the palm of your hand to release the Takk which will then be fixed securely to the wall.

Troubleshooting Takker™

If you inadvertently pull the plunger out more than once, a second Takk will be released into the chamber and may cause a blockage.

If this occurs, simply remove the four black screws from the Takker™ and with the help of a sharp tipped instrument e.g., a screwdriver, gently remove the blocked Takk and re-assemble the unit.

Troubleshooting

Special Offer

Takker™

Takker™ Refill

Takker™ Videos